Aquamasters.TMP.gif (4336 bytes)    
Commercial Aquatic Equipment & Pool and Spa Parts                                                                                               
For Questions, please email to   410-252-2079   
The Source of Your Aquatic Equipment, Needs, & Supplies, Pool Parts


Bathing Suit Dryer

Removes Approximately 95% of the suit's water in approximately 10 Seconds!
Great for Schools, Community Pools, and Aquatic Centers

The Suitmate bathing suit dryer can help eliminate problems caused by wet bathing suits.

  • Reduces Maintenance Costs!
        Energy Efficient
        Removes 95% of the bathing suit's water in about 10 seconds
        Minimizes carpet and floor damage
        Reduces rust and de-lamination of metal or wood lockers.

  • Helps Keep Facilities Fresh and Attractive
        Reduces locker room clutter from hanging suits
        Eliminates a leading cause of mildew, odors, and stains.

  • Enhances Customer Satisfaction
        Eliminates the need to pack wet suits in your sport bag
        Allows suits to be kept in lockers without smell or mildew
        Ends the need to bring plastic bags to the gym
        Helps allow swimsuits to last longer.

  • Operating Features:
        Easy to Follow Instructions
        Apply hand pressure to lid to Start.
        Removes 95% of the water from the bathing suit in about 10 seconds
        Uses no heat.
        Safe for all swimsuit materials.
        Only one (1) suit per operation

  • Safety Features:
        Manual Self-Start and Manual Self-Stop.
        No exposed moving parts
        Built-in ground fault circuit interrupter

  • Built to Last!
        Constructed of Rust-Resistant Stainless Steel and Durable plastic
        Power: 120 VAC, 60 Hz  Must be Hard-Wired. 
        Dimensions are 15" Wide x 15" Deep x 23" High.  Unit weighs 55-Lbs.
        UL Approved
        One (1) Year Warranty

Part #





Bathing Suit Dryer, 115V, 60-Hz

  Note: A Floor Drain is required for this installation.    


Note:  A Floor Drain is required for the Bathing Suit Dryer.
bar7.gif (417 bytes)

Back to Aquamasters USA Swimming Pool Catalog

bar7.gif (417 bytes)

Orders must be Pre-Paid by major credit card: Visa, MasterCard, Discover, Certified Check, Money Order, or Check in Advance.   Aquamasters, Inc. reserves the right to require a certified check in lieu of credit card for certain items.  All Sales are Final.  No returns on special order items.   For returns of Stocking Items, an RGA (Return Goods Authorization) Number is required.  There will be a 25% Restocking Fee on Product Only.  We cannot refund shipping costs.  
: Most Items can ship UPS.  Orders over 150-Lbs (combined)  or items that are too large to ship UPS will be sent via (Motor Freight Carrier) at an additional expense.  Some items less than 150-lbs must be shipped via Motor Freight because of "dimensional weight."  Questions about Shipping, Email us at for Freight Quote. We need City, State, & zip code.   Hours are
 9am - 5pm Eastern Time (EST).  You can
Order On-Line or Call (410) 252-2079.  
Not Shipping Overseas at this time
Minimum Order $50.00.  Orders under $50 may be subject to an additional handling fee.  Prices, Product Specifications, and Appearances may be subject to change without notice.  Copy
right 2014  Aquamasters, Inc.    Last Updated April 2015.  Prices are in US Dollars & are Subject to Change without Notice.  Emailed Quotes are good for 30 days unless otherwise specified.    Aquamasters Home Page
Disclaimer: The information contained herein is included for illustrative purposes only, and to the best of our knowledge, is accurate and reliable.  Aquamasters, Inc) cannot however under any circumstances make any guarantee of results or assume any obligation or liability in connection with the use of this information.  As Aquamasters, Inc. has no control over the use to which others may put its product, it is recommended that the products be tested to determine if suitable for specific application and/or our information is valid in a particular circumstance.  Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product.  Specifier and user shall determine the suitability of products for specific application and assume all responsibilities in connection therewith.