3-Way Thermoplastic Valves
3-Way Valves are manufactured for either two way or three way flow
direction. The Body is one piece
with 2" Ports. The stem and sealing unit is of the rotary type. The self
locking handle makes it easier to use and adjust and the lock ring closure allows quick
and easy maintenance without special tools.
PVC, ASTM D-1784 (white)
ROTOR GATE, SEAL RETAINING PLATE,
PPG, Polypropylene Glass reinforced
ROTOR SEAL, ROTOR O-RING, LID O-RING
EPDM, Ethylene Propylene Diene Monomer
End connectors shall conform to the following standards:
SOCKET ASTM - D2467 (PVC, SCH-80)
ASTM - D2464 (PVC, SCH-80)
INDEPENDENT TESTING RESULTS:
2" - 3 Way Valve
10,000 Cycles under 70 psi water pressure at ambient temperature. Leak Testing:
tests were performed after each 5000 cycles at 70 & 100 psi working pressure at
ambient temperature. No Leakage Occurred! Valve was not lubricated during
the 10,000 cycles. Valve body was tested at 225 psig water pressure for 15 minutes.
Results - No leakage, no structural damage.
Not recommended for compressed air or gas
Valve is a 2" Valve.
Customer to "make it a 1-1/2" valve" by purchasing PVC Reducer
PVC Valve, 2" Connections, White in Color
PVC Reducer Bushing, 2" x
Aquamasters Valve Catalog
Back to Aquamasters USA On-Line Catalog